Spicer 2011 Spicer Bulletin 1; SERVICE_TECHNICAL INFORMAT Manual de usuario descargar pdf

Spicer Service Parts  Dana Holding Corporation  www.spicerparts.com  www.dana.com

JOI-TEC-059

DETERMINING TUBE LENGTH WHEN

ASSEMBLING A SPICER

WING-IN-A-BOX KIT

SERVICE/TECHNICAL

DATE: August 8, 2011

TO: All Dana Spicer

Service Parts Universal Joint Customers

This bulletin supersedes bulletin JOI-TEC-058. To determine the length of the tubing

needed when assembling a Spicer Wing-In-A-Box kit follow the guide below.

Example:

A 6C Series shaft is required, with a total length of 1143 mm (45 Inches) in a fully closed

(collapsed) position over the front face of the bearing caps.

 TOTAL LENGTH [Lc] = 1143 MM

 SLIP JOINT [C] = DIMENSION C Will Be Needed (See Graphic Example Above).

 TIGHT JOINT [D] = DIMENSION D Will Be Needed (See Graphic Example Above).

 Tube Required (T) = 1143 (Total Length) minus Dimension C & D

Therefore T= Lc – (C + D)

T = 1143 – (232.5 + 75)

T = 1143 – 307.5

T = 835.5 MM

Tube Necessary = 835.5 MM Total Length to Produce a Shaft Of 1143 MM at Closed Position.

Please visit the Expert web site, www2.dana.com/expert, for the latest product information and

literature downloads. Current literature can also be downloaded from www.spicerparts.com.

Click on the Literature button or The EXPERT

icon, and navigate to the literature needed.

Skip Pogan

Product Manager

Spicer

Driveline Products

id10751000 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com

Pagina 1

Spicer Service Parts  Dana Holding Corporation  www.spicerparts.com  www.dana.com JOI-TEC-059 DETERMINING TUBE LENGTH WHEN ASSEMBLING

Sin comentarios

Spicer 2011 Spicer Bulletin 1; SERVICE_TECHNICAL INFORMAT Manual de usuario